Skip to main content
DD-CAT IDE logoDD-CAT IDE

Wire Cross-Section (Current)

Favoriteused 3 times

Estimate cross-section from load current and rule-of-thumb current density, rounded to standard sizes.

Key points

Wire Cross-Section (Current): Estimate cross-section from load current and rule-of-thumb current density, rounded to standard sizes. Formula: S = I / J (J: copper open 6 / conduit 5 A/mm²; aluminum one tier lower). Enter parameters on the DD-CAT IDE online tool page to get results instantly, with a calculation-model diagram that updates with the inputs. Rule-of-thumb density is only a first pass; for final selection, consult ampacity tables by installation / ambient / bundling and check drop and thermal stability.

Inputs

S = I / J (J: copper open 6 / conduit 5 A/mm²; aluminum one tier lower)

Calculation model (updates with parameters)

6 mm²IStandard cross-section (Cu/Al; see results before rounding)
Calculated cross-section5.33 mm²
Suggested standard cross-section6 mm²
corresponding ampacity36 A (estimate)

Engineering notes

  • Rule-of-thumb density is only a first pass; for final selection, consult ampacity tables by installation / ambient / bundling and check drop and thermal stability.

FAQ

What is Wire Cross-Section (Current) for?
Estimate cross-section from load current and rule-of-thumb current density, rounded to standard sizes.
What is the formula for Wire Cross-Section (Current)?
Core formula: S = I / J (J: copper open 6 / conduit 5 A/mm²; aluminum one tier lower). The tool returns results instantly using this formula and the selected parameters.
What engineering notes should I keep in mind when using Wire Cross-Section (Current)?
Rule-of-thumb density is only a first pass; for final selection, consult ampacity tables by installation / ambient / bundling and check drop and thermal stability.
ShareWeiboXLinkedIn
Embed this calculator on your site / blog / intranet

Copy the snippet below into any HTML-capable page — visitors get the same live calculator, styling included.