Via current / resistance
Via resistance and current capacity from drill, board thickness, and plating — check before switching layers at high current.
Key points
Via current / resistance: Via resistance and current capacity from drill, board thickness, and plating — check before switching layers at high current. Formula: R = ρ·L/A | A = π/4·[(d+2t)² − d²]. Enter parameters on the DD-CAT IDE online tool page to get results instantly, with a calculation-model diagram that updates with the inputs. For power plane transitions, conservatively estimate 0.5–1A per via; do the same for GND via arrays. 0.3mm mechanical drill is the most common process minimum; laser micro-vias have their own limits.
Inputs
R = ρ·L/A | A = π/4·[(d+2t)² − d²]Calculation model (updates with parameters)
| Hole-wall copper cross-section | 0.0255 mm² | 40 mil² |
| Via resistance | 1.081 mΩ | Milliohm range; lower with multiple parallel vias |
| Voltage drop / dissipation @ 1 A | 1.081 mV · 1.081 mW | |
| Current capacity (ΔT=10°C) | 951.2 mA | Per IPC-2221 inner-layer model |
Engineering notes
- For power plane transitions, conservatively estimate 0.5–1A per via; do the same for GND via arrays.
- 0.3mm mechanical drill is the most common process minimum; laser micro-vias have their own limits.
FAQ
- What is Via current / resistance for?
- Via resistance and current capacity from drill, board thickness, and plating — check before switching layers at high current.
- What is the formula for Via current / resistance?
- Core formula: R = ρ·L/A | A = π/4·[(d+2t)² − d²]. The tool returns results instantly using this formula and the selected parameters.
- What engineering notes should I keep in mind when using Via current / resistance?
- For power plane transitions, conservatively estimate 0.5–1A per via; do the same for GND via arrays. 0.3mm mechanical drill is the most common process minimum; laser micro-vias have their own limits.
Embed this calculator on your site / blog / intranet
Copy the snippet below into any HTML-capable page — visitors get the same live calculator, styling included.