What is the formula for Load Cell Output & Gain Calculator?

Core formula: V_out = V_ex × sensitivity (mV/V) × load / capacity. The tool returns results instantly using this formula and the selected parameters.

Load Cell Output & Gain Calculator

Favorite

From mV/V sensitivity and excitation, compute bridge output at full scale and at the current load, the gain needed and the ADC bits required — before wiring up an HX711 or ADS1232.

Key points

Load Cell Output & Gain Calculator: From mV/V sensitivity and excitation, compute bridge output at full scale and at the current load, the gain needed and the ADC bits required — before wiring up an HX711 or ADS1232. Formula: V_out = V_ex × sensitivity (mV/V) × load / capacity. Enter parameters on the DD-CAT IDE online tool page to get results instantly, with a calculation-model diagram that updates with the inputs. Only four-wire connection (excitation ± and signal ±) removes lead resistance; shield long cables and ground at one point. The HX711 uses a fixed gain of 128 with AVDD as reference — check its datasheet rather than reusing the gain suggested here.

Inputs

V_out = V_ex × sensitivity (mV/V) × load / capacity

Calculation model (updates with parameters)

Full-scale output	10.000 mV	5.00V × 2.00mV/V
Output at current load	4.0000 mV
Output per kg	200.00 µV/kg
Suggested gain	×250.0	把满量程抬到Reference voltage 2.50V
Full scale after gain	2.500 V
ADC effective bits required	14 bits	分度 3000 份 × 4 ×Margin（理论下限 13.6 bits）

Engineering notes

Only four-wire connection (excitation ± and signal ±) removes lead resistance; shield long cables and ground at one point.
The HX711 uses a fixed gain of 128 with AVDD as reference — check its datasheet rather than reusing the gain suggested here.

FAQ

What is Load Cell Output & Gain Calculator for?: From mV/V sensitivity and excitation, compute bridge output at full scale and at the current load, the gain needed and the ADC bits required — before wiring up an HX711 or ADS1232.
What is the formula for Load Cell Output & Gain Calculator?: Core formula: V_out = V_ex × sensitivity (mV/V) × load / capacity. The tool returns results instantly using this formula and the selected parameters.
What engineering notes should I keep in mind when using Load Cell Output & Gain Calculator?: Only four-wire connection (excitation ± and signal ±) removes lead resistance; shield long cables and ground at one point. The HX711 uses a fixed gain of 128 with AVDD as reference — check its datasheet rather than reusing the gain suggested here.