Skip to main content
DD-CAT IDE logoDD-CAT IDE

Articles

News & Articles

Product news, technical insights, and industry practices — updated regularly.

Tech Insights

Superposition as a Fairy Tale: Two Water Sources, One Channel — Solving Multi-Source Circuits One Source at a Time

This is a spin-off of the "Black Box Castle" series. I use a constant-level water tower and a constant-flow spring to explain the superposition theorem: a 12 V tower in series with 2 Ω, a 3 A spring in parallel with 6 Ω, plus a 3 Ω main channel. Splitting into two subcircuits and solving each by hand gives water level 6 V + 3 V = 9 V, and the three branch currents 1.5 A / 1.5 A / 3 A match direct KCL exactly. It also clarifies the correct way to "turn off" sources (short voltage sources, open current sources, keep internal resistances of real sources, never touch controlled sources) and why power cannot be superposed — 27 W ≠ 12 + 3 W; the missing 12 W is exactly the cross term.

Read more →

Tech Insights

ADC Code to Voltage: Remember the 1 LSB Formula for Error-Free Sensor Calibration

Starting from raw ADC code values printed over a serial port, this article explains the code-to-voltage conversion formula and the meaning of 1 LSB, demonstrates a sensor calibration conversion with an online calculator, and summarizes common pitfalls such as using the wrong denominator or reference voltage.

Read more →

Tech Insights

Linear and Angular Velocity: v=ωr and RPM Conversion Notes

Use v=ωr=2πnr/60 to sort out a rotating body's angular velocity and linear velocity in one step. This article documents my parameter choices, unit conversions, and common mistakes in motor selection, belt pulley, and grinding wheel scenarios, and demonstrates verification with an online calculator.

Read more →

Tech Insights

Shunt Resistor Current Sensing: How to Choose Resistance, Gain, and Power

A walkthrough of shunt-resistor current-sensing calculations: starting from Vsh = I × Rsh and Vout = Vsh × G, checking power dissipation and ADC full-scale range, using an online calculator to work out resistance, gain, and power for a 12V/5A case, plus selection tips and common mistakes.

Read more →

Tech Insights

Sallen-Key Single-Op-Amp Bandpass Filter: Component Selection and Common Pitfalls

My notes on designing a 2nd-order single-op-amp Sallen-Key bandpass filter at f0=1kHz and BW=500Hz: from picking capacitor values by gut feeling, to deriving R/C values from the k, Q, and gain relationships, then rounding to standard values and checking GBW.

Read more →

Tech Insights

Chip Junction Temperature Calculator Notes: Thermal Resistance Chain, Parameter Selection, and Common Mistakes

Notes from debugging an overheating LDO: using the thermal resistance chain θJA=θJC+θCS+θSA to calculate junction temperature revealed that with no heatsink the junction exceeded the limit by more than 100%. Shares common pitfalls in power dissipation, ambient temperature, and interface materials, plus a hands-on run with an online junction temperature calculator.

Read more →